Dimensions (L x W x H) - 55.88 x 61 x 106.68 cm (22” x 24” x 42”)
Air Changes per Hour - 6 ACH @ max 9,000 ft
Airflow - 300-900 cfm
Net Weight With Filters - 70 lb
Shipping Weight - 95 lb
Power Supply Requirements - 12 VAC, 60 Hz, 15 A
Circuit Breaker - 12 A
Cabinet Material - UL94HB flame retardant resin with EPA-Registered microbial inhibitor
Pre Filter Access - Hinged door secured by rotating latches. Full perimeter gasket seals to protect against bypass of dirty air
Stage 2 Pre_Filter - UV-resistant 2 pleated particulate pre-filter (MERV 8)
Stage 1 pre-filter - 1 coarse particulate pre-filter (MERV 4)
Final stage HEPA filter - Long-life true HEPA tested and certified to an efficiency of 99.97% or higher for 0.3 micron particles
Transportability - Built-in Dolly - Two-wheel dolly consisting of 8 solid, non-marking rubber rear wheels, 360degreeswivel front casters and a secure top handle for gripping
Lamp Type - UVGI, 39 W total output
Amperage - 3.5 A or less (Daisy-chain multiple units on one 15 amp circuit)
Motorized Impeller - Motorized impeller rated for 100,000 hours with thermal overload protection, auto reset, 60Hz, single-phase
Certifications - NRTL-certified to comply with UL Std. 507 & CAN/CSA Std. #C22.2 No. 113-M1984 for electrical safety
Third Stage Pre Filter - An internally mounted, 39-W, UVGI lamp located below the pre-filters in a single module