

CAP1200-UV DETAILS & SPECIFICATIONS

-min.png)
AIR FILTERS & UV LAMPS
Convert Your Central HVAC System into a Hospital-Grade HEPA Filtration System for Your Entire Home or Office​
Allergists, pediatricians, and other healthcare professionals often recommend state-of-the-art HEPA filtration technology to remove microscopic pathogens, allergens, and irritants from the air in their patient’s homes.
More than 99% of the particles suspended in indoor air are less than one micron in size, far too small to be captured by most types of filters.
Particles this tiny have been identified by scientists at the U.S. EPA and elsewhere as potentially “lung damaging”, because they are small enough to bypass our defense mechanisms and lodge deep in our lungs.
CAP1200UV
Abatement Technologies® CAP1200-UV Central Air Purifiers, with True HEPA filters, is so efficient that can remove at least 99.97% of these microscopic airborne particles (@ 0.3 microns in size), including those that can trigger asthma and other allergic reactions. CAP1200-UV Whole-House or Office HEPA Air Cleaners feature multiple filtration stages to remove particles, plus an activated carbon filter to remove odors and some VOCs (Volatile Organic Compounds).
The CAP1200-UV model combines the high-performance, four-stage air filtration and germicidal UV disinfection.​
​
The CAP1200-UV model is equipped with:
-
Stage One - 1” pre-filter for capturing larger dirt particles
-
Stage Two - 2” Pleated Particulate Filter
-
Stage Three - 2” Pleated VAPOR-LOCK® Carbon Particulate Filter (
-
Stage Four - 99.97% efficient true HEPA filter
-
Stage Five - Germicidal UV lamp
​
Dimensions (L x W x H) - 16.75" x 16.625" x 32.5"
Airflow - 980 cfm when operated in conjunction with HVAC motor/blower
Net Weight With Filters - 62 lb
Energy Consumption - W 370
Operating Amps A - 4 or less
Power Supply Requirements - 120 VAC, 60 Hz
UV Lamp Output - µW/cm² 38 @ 1 Meter
Cabinet Material - 16 gauge anodized aluminum


Cabinet Seams - Riveted construction
Interlock switch - Interlock switch Turns lamp and motorized impeller OFF if HEPA filter access panel is removed when the unit's power switch is 0N
Collar Diameters - 10"
Motorized Impeller - 134 W with thermal overload protection, automatic reset, 60 Hz, single phase
Power switch indicator - Rocker-arm style power ON/OFF switch which illuminates when it is in the ON position
Power cord - Hardwired 8 ft 18/3 AWG SJTW
Filter change indicator - Amber light
Accessories - 10” exhaust collar and two solid cover plates
